Before you install the USB LED strip
1.Clean the dust off of the back of your TV. Ensure that the back of your TV is free from dust before installation to avoid having the strip fall off.
2. For the usb port, the electrical current can't exceed 1A, When you insert the LED strip to the TV's usb port and it don't turn on or flashes sometimes, you can simply use a 5V 1A Universal
USB Wall Charger to power the led strip instead.
1.Cut(As needed): Cut On the Cut Marks (White Lines) on the strip to desired length.
2.Peel: Remove the 3M adhesive backing on the strip.
3.Firmly Press the strip in desired place and Connect the USB to USB port.
You can press the speed/bright key about 3 seconds to turn on/off the controller.